Odarid Pet Stain & Odour Remover NEW FORMULA

Product Description

Pet Stain and Odour Remover (new formulation)

• Ready to use on carpets, fabrics, flooring, concrete etc
• Works instantly and effectively on new or old urine odour
• Eliminates odour by destroying uric acid and salt residues
• Removes new organic staining in carpets and fabrics
• Completely degrades faeces and blood residues
• Micro emulsion technology enables penetration of concrete and wood to completely eliminate odour on contact
• Non toxic, biodegradable and enviromentally safe
• Available Fragrance-free or with a subtle floral fragrance
• Light misting of product finds contaminated areas

 

Product Information

Helpful hints

• To find contaminated areas, lightly spray Odarid around until you see white foam, then treat those areas as directed.
• Always remove excess residues before treating contaminated areas
• Odarid is safe to use around humans and animals, but should never be sprayed directly onto them
• Always test carpet, rugs, fabric etc for colourfastness in an inconspicuous area as some dyes are unstable
• If you have already tried using other chemical or cleaners on the contaminated area but are still experiencing odour problems, allow to dry completely before using Odarid
• Always wear a protection gloves as skin irritation may occur on sensitive skin
• If you are going to have your carpets cleaned, do so afer you have removed all urine with Odarid
• If you have walked in urine, treat the sole of you shoe with Odarid so you do not spread urine residue around.

Direction for Use

Carpets, Rugs, Fabric, Bedding, and Upholstery

New urine

• Remove as much urine as possible by absorbing with old towel or paper towel and throw away
• Completely saturate the area(s) with Odarid and allow to air dry

Old Urine

• Lightly spray Odarid around until you see contaminated areas foaming
• Completely saturate the contaminated area(s) with Odarid (and carpet underlay if necessary)
• Allow to air dry. Using a dehumidifier or a wet vacuum to remove excess liquid will assist drying time

Concrete

• First treatment on concrete may be diluted 1 part odaried to 1 part warm water
• Follow up treatment and maintenance - use a dilution of 1 part Odarid to 5 part warm water

Tiles, Grout, Wood Flooring, Decking, Plastic

• Apply Odarid onto contaminated area(s) and leave product to work until it stops foaming
• Mop up using fresh water and allow to air dry

Chipboard or Plywood Sub Flooring

• Completely saturate the contaminated area(s) with full strenght Odarid
• Allow to dry. To assist the drying process in humid or cold weather, use a dehumidifier or wet vac
• Where contamination is heavy, repeat treatments will continue to break down odour forming uric acids and salts

Human Incontinence

• Saturate the entire contaminated area of garment or bed linen with full strengh Odarid
• Leave for at least 10 minutes before washing as usual

Safety Directions

• Keep stored out of reach of children
• Wear protective gloves to avoid irritation to sensitive skin. Avoid contact with eyes

 

Product Warranty

Vet Information